Logical Volume Space Report shows 100% used

[Mark_575]

Hi,

A few weeks ago I noticed that when I run the Logical Volume Space report that the SIM server would report 100% full on its volumes, despite the total size(MB) and used (MB) being miles apart.

Now this problem has extended to many servers, thus making this report useless.

Has anyone seen this before and know how to cure it.

I have SIM 5.1 SP1 and a variety of Agents from 7.91 downwards.

Thanks in advance.
Mark.

[Rob Buxton]

If you're using WBEM to collect the data it's been known about for ages. No idea why it's not been fixed.

[Mark_575]

OK, so this is great.

I've played with this for over an hour now.

If I disable WBEM from the global settings then the report runs OK.

However then three IBM servers that require WBEM are excluded from the reports.

When I try to just enable WBEM for these three servers it does not work, as it's must take the higher global setting which is disabled.

One IBM Server has the IBM Director agent on it which from reading this forum was suppose to act like the HP server agents, but that appears not to be the case.

Any suggestions?

Cheers
Mark.