Management Drivers and Agents, is not installed

[Andrzej Olejarz]

I have RHEL4 and ProliantPack 7.8.
When I make Identyfi System... :

Starting identification process...
Checking for known running web servers.
Checking for System Management Home Page and other HP web agents.
Received a response from the system management homepage, this system supports SMH.
Checking for WBEM support on system.
This system has WBEM protocol support
This system does not have any SMI-S CIMOM installed
This system has a server CIMOM installed
Running WBEM rules based identification.
Got ComputerSystem WBEM/WMI data from the system
Running WS-Man identification.
Checking for SNMP support on system.
The system responded to a SNMP request, it supports SNMP.
Running SNMP base Cluster identification using common cluster MIB.
This was not a system with the common cluster MIBs supported.
Running HP ProLiant management agent identification
System has the SNMP ProLiant server (foundation) agents installed, adding system type.
Running HP NetServer identification.
System supports the NetServer SNMP agent, adding system type
Running HP-UX SNMP identification.
System does not have the HPUX SNMP agents installed.
Running SNMP System Type Manager identification.
Found matching SNMP System Type Manager rule, added as possible system type
Checking for DMI protocol support.
The Windows CMS cannot communicate with HP-UX or other DMI, skipping.
Running DMI System Type Manager identification.
The system does not have Windows DMI support.
Running HP-UX DMI identification.
The system does not have HP-UX DMI support.
Running HP/Compaq Desktop identification.
The system does not have Windows DMI support.
Running HP DMI Desktop identification.
The system does not have HP DMI Desktop support.
Running Generic DMI identification.
The system does not have Generic DMI support.
Checking for SSH protocol support.
The system supports SSH protocol
Running Storage identification.
Storage identification completed.
Running HP Service Guard Identification.
The system is not part of HP Service Guard cluster
idPluginStart.IPMCompatible
Running VM identification.
Checking for license data on system.
SMH trust status is true.
Running limited data collection for common attribute.
Done with limited data collection, checking retrieved data.
Building system relationships.
System identification done with this system.


but when I make Configure or Repair Agents there are two problems(HomePage not active and Agents not installed):

Successfully configured SSH for host based authentication
--------------------------------------------------------------------------------
Successfully ran Linux configuration commands
>Zatrzymywanie snmpd: [ OK ]
>>>Uruchamianie snmpd: [ OK ]
>>>

My snmp.conf:

# Following entries were added by HP Insight Management Agents at
# Wed Feb 6 10:50:10 CET 2008
dlmod cmaX /usr/lib64/libcmaX64.so
rwcommunity aaaaa 127.0.0.1
rocommunity aaaaa 127.0.0.1
rwcommunity aaaaa 192.168.1.148
rocommunity aaaaa 192.168.1.148
trapcommunity aaaaa
trapsink 192.168.1.148 aaaaa
trapsink hpsim
syscontact Root (configure /etc/snmp/snmp.local.conf)
syslocation Unknown (edit /etc/snmp/snmpd.conf)