Server Management - Systems Insight Manager
1833913 Members
3186 Online
110063 Solutions
New Discussion

Re: missing system magment colum

 
Bas van den Dikkenberg
Occasional Contributor

missing system magment colum

I'm missing at one of my servers the System Management Pages.

I have on that server installed snmp + openssh
But don't get the System Management Pages why

At Management Protocols i only have SNMP:1.0

And at ther other servers i have these managemnet protocols:

Management Protocols HTTP:1.0, SMH:2.0, SNMP:1.0, SSH:SSH-2.0-OpenSSH_3.7.1p1


5 REPLIES 5
Rob Buxton
Honored Contributor

Re: missing system magment colum

Have you installed the HP SIM Agents on that Server?
What kind of Server is it?
It indicates either the Agents are not installed or they're not running. The Agents are Web Based, SNMP is required for the Server discovery and identification by HPSIM. OpenSSH is not involved at this point.
Bas van den Dikkenberg
Occasional Contributor

Re: missing system magment colum

ML350 g4 running windows 2003

installed with smart start 7.30 en updated with support pack 7.40

al agents are running according to managment homepage

Rob Buxton
Honored Contributor

Re: missing system magment colum

Try rerunning the Identification Task for the Server. Then check the protocols discovered.

Try browsing to the Server directly, e.g. https://server:2381, first from the Server itself and then from the HPSIM Server.

Any firewalls possibly restricting the ports 2301 (http) or 2381 (https)?
Rob Buxton
Honored Contributor

Re: missing system magment colum

I'll also assume you installed 7.20A and went to 7.30A. I don't believe there's a 7.40 available as yet.
Bas van den Dikkenberg
Occasional Contributor

Re: missing system magment colum

The problem was in the ip bindings that server was is in other subnet as defind in the security options of system mangement homepage.

Thanx voor al your help