Modify IBM Alerts in HPSIM

[Barry Hyronimus]

I have my IBM servers sending traps to the HPSIM however they all come across as informational. Is there a way to modify the mib or configure it so that HPSIM understands the value of the alert. For example I pulled the Powersupply and replaced it I got 2 alerts one with a value of 2 for Critical and one with a value of 1 for OK. However they both show as informational in HPSIM

[Rob Buxton]

You can try under Options -> Events -> SNMP Trap Settings find the MIP and change the value there.

[Santhosh Ramesh]

http://h10018.www1.hp.com/wwsolutions/misc/hpsim-helpfiles/hpsim_managing_nonHPservers.pdf

Maybe this white paper might help...

-Santhosh

[Barry Hyronimus]

Both answers will get me going. The only problem I see is that some of the traps must be dynamic. After the adjustments a powersupply insert is now a critical vs informational. In the IBM Director product it looks at the severity result in the trap and logs it as critical or informational.
But I think I can live with it..

Thanks

[Barry Hyronimus]

Solution works good enough