Multiple instances of the CMS server

[John Stalzer]

In my â all Systemsâ view I show two instances of my CMS Server. One of the instances shows the HWStatus to be disabled, and the other doesnâ t. The serial # is being shown as the system name on the one that is showing disabled. Clicking on the HWStatus on my CMS server only gives me my â Version Controlâ info. Iâ m missing info on the NIC, storage, system, etc.
Is there a way of correcting this?

Thanks,
John

[Rob Buxton]

That sign indicates the Server has been Disabled from monitoring.
Click on the Server name in the HPSIM disply, from there click on the Tools & Links tab and then the Suspend/Resume Monitoring. You should be able to re-enable it there.

Not too sure why there are two unless you have multiple NIC's for this Server.

[John Stalzer]

I checked to see if the monotoring was disabled, but I found it enabled. I also tried disabling and enabling it to see what would happen, but all remained the same.
I also double checked to see if I had multiple nics. Even thought I do, the other is disabled.