No Support Pack version 7.70 in VCR

[Mikael_17]

Hi

Anybody who can tell me why I can't see any Support Pack 7.70 in my VRC (downloads every saturday)?.
The release was 13 dec.

Regards Mikael

[Hemantha Kumara]

What version of VCRM you are using. Please upgrade/install VCRM version 2.1.7 from old version on your system and check.
VCRM will come in the Management CD.
If you are using the Old version of VCRM then you will not be able to see the agents version above 7.5

[Mikael_17]

Hi
I'm running version 2.1 from HP SIM 5 SP5
I can see Support Pack version 7.60.

Regards Mikael

[SEBEMISMNUSA]

I had the same problem. I was running VCRM BELOW version 2.1.7.

I needed to install the Proliant Support 7.6 or 7.7 for Microsoft Windows 2003 64 bit. It was not in my VCRM, although the updates were running fine every few days.

This explains why.

I manually updated the VCRM. I will update VCRM to 2.1.7.

End

[Stefan Laemmer]

Mikael,
sorry no solution here either. I saw the same thing. Nothng in the VCRM, but the website has it. And mine is set to download every night.

[Stefan Laemmer]

Replied to the thread without seeing the other replies.. Upgrading my VCRM right now from 2.1.5 to 2.1.7.

[Rancher]

I have also had this trouble before, even when my VCRM was up to date. It sometimes seems that there is a "lag time" from when the PSP is posted and when it is actually available for download to the repository. The last one to come out did not download until about two weeks after it was posted on the site. Even though this PSP shows a release date of Dec., it did not actually show up on the site until around Jan. 18th or so. I am hoping it will download next week.

[Rob Buxton]

There's been a few comments about 7.70, it has a date of 13th December but certainly appeared quite a bit later than that date.

[Stefan Laemmer]

I manually imported the SP 7.70 and am rolling it out to all servers. There is sign of it yet from the autodownload..

[Stefan Laemmer]

I manually imported the SP 7.70 and am rolling it out to all servers. There is no sign of it yet from the autodownload..

[Albert_39]

Can some of you check your VCRM logs? Mine had pages and pages of failed downloads. Not sure if there is a larger issue going on. I had to upload the 7.7 manually as well as the 1.89 ILO firmware. Of course the Version control agent thinks the ILO is the Japanese version and it flagging 1.88 as the latest firmware in the repository.

[Steven Baillie]

I am also having a large amount of errors in the log.


error as below.
There was a problem with a downloaded file, cp000xxx.exe, and the file has been deleted. If the problem reoccurs, the file should be manually copied to the repository.

I also had to upload PSP 7.70 manually to the repository.


steven