RILOE II not Identified by SIM 4.1 after Firmware Upgrade

[Rick Loevenstein]

I applied HP Support Pack 7.10 to 30 servers. I installed all support pack updates except for the RILOE II firmware. Once I verified that Support Pack installed successfully on all servers, I installed the RILOE II firmware upgrade (version 1.13). Now, SIM 4.1 shows a question mark in the MP column for 18 of the 30 servers. I have tried deleting and re-discovering the devices and I ran device identification multiple times. It appears that SIM can discover the RILOE II devices, but device Identification is not successful. Functionality of the RILOE II cards is fine, and I confirmed that the firmware was upgraded to 1.13 successfully. All of the RILOE II devices were identified correctly by SIM prior to the RILOE II firmware upgrade. Little help?

[Jeff Hanchey]

I have this same problem based on the same changes. Upgraded Support Pack to 7.10. Then flashed the RILOE II firmware to 1.13. Question Mark in MP column. Any ideas?

[Dennis vdH]

Same problem. Updated some novell servers to psp710, after that i upgraded the riloeII to firmware 1.13. Sim41 recognizes both the server and riloe, but it doesn't see that they are linked together. Cpqri.nlm is loaded at the console.