1833777 Members
2112 Online
110063 Solutions
New Discussion

RILOE II

 
Eduardo Rosón
New Member

RILOE II

Hi to all,

I have a problem: SIM 4.2 doesn’t associate the RILOE’s with their servers, any i
4 REPLIES 4
Ed Cox
Respected Contributor

Re: RILOE II

Eduardo,
One one of the target servers that has the RILOE II installed, go to Control Panel to the HP Mangement Agents applet. Check the list of Active and Inactive agents and look for an agent called Remote Insight information. Make sure it is on the Active list.
Then go back to SIM and go to Logs > View All Scheduled Tasks and run the Daily Device Identification task. Probably wouldn't be a bad idea to run Autodiscovery again either.
Ed
Rob Buxton
Honored Contributor

Re: RILOE II

Are the RILOE II's being discovered and identified as Remote Insight Lights Out Edition II in HPSIM.

Check on the RILOE II Config, the Data returned Setting needs to be at least Minimum.

On the Server with the RILOE II what is the status of the MP Column?
Try running the Identification Task for the Server.
Eduardo Rosón
New Member

Re: RILOE II

Good morning,

Ed: thanks for your reply but I have to say that Remote Insight Agent is working on every server.

Rob: All RILOE's are discovered correct. The status on MP column is No management processor discovered on system

I'm going to do a Discover process again but I believe is not going to work,

Any other idea?
Darrin Rawls
HPE Pro

Re: RILOE II

Call HP Support (and ask for your case to be escalated); I believe there is a temporary fix available that is being worked on that you can get from them that hasn't been qualified for a "SP" yet for HPSIM.

-Darrin


I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo