SIM 4.2sp2

[Jesus Velazquez]

When deploying Proliant Support Pack 7.30 to multiple servers simultaneously only the first server completes and the rest fail. I've tested this procedure with as little as 2 servers at a time.

Any suggestions??

[Brent Seizer]

Don not install the PSP from the CD. This causes it to run in read-only mode.

Copy the PSP 7.3 to the repository manager on your CMS server.

Replicate your server settings from a server thats working to the new server that your setting up.

From the managed server your setting up, use the VC agent to select the PSP from the respository manager. Install the PSP using the VC agent.

[jim goodman]

If you are not using the CD, but VCRM....

Depending on your version of VCRM you may need to install this Software Deployment Task Patch and see if this helps (read the readme for validation):

ftp://ftp.compaq.com/pub/softpaq/sp30501-31000/sp30629.TXT

ftp://ftp.compaq.com/pub/softpaq/sp30501-31000/sp30629.exe

- Jim

[Jesus Velazquez]

I am running the PSP deployment from the repository. I will try the patch to see what I get.

Thanks a bunch!

Jesus