Server Management - Systems Insight Manager
1833780 Members
2193 Online
110063 Solutions
New Discussion

Re: SIM 5.1 alert problem

 
Peter Scaringi
Advisor

SIM 5.1 alert problem

I have HP SIM 5.1 working great, but a problem exists with my MS clustered DL380G4 and MSA1500. I have had two predictive failure drives this month and SIM/OSEM/ISEE did not send the trap out to create a case number. OSEM is not showing the alert either. Is this because I do not have SMI-S installed ? Before 5.1, I had the OSEM/ISEE installed and the traps would originate from both nodes to OSEM/ISEE, thus opening two HP case numbers. Now with 5.1 I can not get failure traps on this cluster to go through OSEM/ISEE. I know it works for single servers as I had another server get a predictive failure hard drive and it processed through get a HP case number. Is there is something I am missing ?


Claude
2 REPLIES 2
Peter Scaringi
Advisor

Re: SIM 5.1 alert problem

I fixed this one myself. The bug in cluster monitoring in HP SIM 5.1 still exists. After the cluster was switch nodes last week, HP SIM took the virtual IP on node 1 instead of it's physical IP. I removed the server and readded/discovered it and now it seems to be working.

Peter Scaringi
Advisor

Re: SIM 5.1 alert problem

closing thread