sim and ilo question

[tob_1]

Hello,

Is it possible to use HP SIM to get information about the hardware health of a HP server by using the ilo only and not using the hp system management homepage (hpsmh) ?

[Martin Smoral]

I believe so, If you set the ILO to Passthrough the SNMP Traps......"For best protection of the servers operating inside the DMZ, administrators should set the SNMP trap destinations to the loop back address and enable the SNMP Pass-through in iLO so that SNMP traps are routed onto the iLO network instead of over the management network. While this SNMP pass-through option does not enable all management functions, it allows for passing status, inventory, and fault information to HP Systems Insight Manager or another SNMP-capable management application..."