Unable to clear the Integrated Management Log

[Eric Williams_4]

I upgraded my client to the 7.1 PSP. And I can't clear the Integrated Management Log from previous alerts. I am logged in with administrator priveledges and SNMP sets are enabled.

[Gordon Leonard]

Do you have a RW or RC SMNP string configured in the SNMP service?

[OlivierV]

We had the same issue on a server and it was resolved by upgrading the firmware of the Ilo. It was also impossible to clear the log using the GUI tool the HP tools.

[Martin Modin]

Eric did you ever find a solution for this? I have the same problem and I do not have any iLO card.

[Eric Williams_4]

Check to make sure that the SNMP trap settings are correct. The community string needs to be read write or read create. If it is read only, it will not work. Otherwise, depending on what version you are on, i would recommend upgrading the PSP to the latest version. But FYI, when upgrading PSP's, there will be a brief 1 or 2 second outage when it upgrades the NIC drivers.

[Martin Modin]

Thanks...
Someone had changed the settings to read.

Thank you very much.

[Crashlanding]

For security reasons we do not use the RW or RC for SNMP.  Youcan go into the iLO and clear the Integrated Log as well as the iLO Log.

[Andrew_Haak]

Hello,

Please look at this link: http://h30499.www3.hp.com/t5/ITRC-HP-Systems-Insight-Manager/Clearing-IML-entries/td-p/3252551#.VQhwqX20vMI