Using OpenSSH with Windows Server 2003 for Public Key Authentication

[Richard Garner]

Hi,

I can get password authentication to work but when I try to access a Windows 2003 Server setup with HP OpenSSH using Public Key Authentication, I get authenticated using PKI and then immediately "kicked out" of my session with "Exit status 1"

This happens from Windows to SSH Server Windows and from HP-UX to SSH Server Windows.
I've attached screenshots in the Word document attached.

Any ideas?

BTW, does anyone know HP's position on the use of HP's OpenSSH on Windows?

[Richard Garner]

Here's some additional information (output) that may be helpful for anyone that can help:

C:\>ssh lnaisq01.na.lafarge.net -vv
OpenSSH_3.7.1p1, SSH protocols 1.5/2.0, OpenSSL 0.9.7b 10 Apr 2003
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to lnaisq01.na.lafarge.net [10.178.16.75] port 22.
debug1: Connection established.
debug1: identity file /home/Cyborg/.ssh/identity type -1
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug2: key_type_from_name: unknown key type '-----END'
debug1: identity file /home/Cyborg/.ssh/id_rsa type 1
debug1: identity file /home/Cyborg/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_3.7.1p1
debug1: match: OpenSSH_3.7.1p1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.7.1p1
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:

aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lys
debug2: kex_parse_kexinit:

aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lys
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:

aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lys
debug2: kex_parse_kexinit:

aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lys
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 144/256
debug2: bits set: 1619/3191
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host 'lnaisq01.na.lafarge.net' is known and matches the RSA host key.
debug1: Found key in /home/Cyborg/.ssh/known_hosts:2
debug2: bits set: 1584/3191
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/Cyborg/.ssh/identity (0x0)
debug2: key: /home/Cyborg/.ssh/id_rsa (0x101ca510)
debug2: key: /home/Cyborg/.ssh/id_dsa (0x0)

debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug1: Next authentication method: publickey
debug1: Trying private key: /home/Cyborg/.ssh/identity
debug1: Offering public key: /home/Cyborg/.ssh/id_rsa
debug2: we sent a publickey packet, wait for reply
debug1: Server accepts key: pkalg ssh-rsa blen 149
debug2: input_userauth_pk_ok: fp e0:eb:05:19:93:d6:fb:2c:90:0a:f0:55:48:5d:d4:5a
debug1: read PEM private key done: type RSA
debug1: Authentication succeeded (publickey).
debug1: channel 0: new [client-session]
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: ssh_session2_setup: id 0
debug2: channel 0: request pty-req
debug2: channel 0: request shell
debug2: fd 3 setting TCP_NODELAY
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel 0: rcvd adjust 131072
Last login: Wed Mar 28 12:00:46 2007 from lnaefc40
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug2: channel 0: rcvd eof
debug2: channel 0: output open -> drain
debug2: channel 0: obuf empty
debug2: channel 0: close_write
debug2: channel 0: output drain -> closed
debug2: channel 0: rcvd close
debug2: channel 0: close_read
debug2: channel 0: input open -> closed
debug2: channel 0: almost dead
debug2: channel 0: gc: notify user
debug2: channel 0: gc: user detached
debug2: channel 0: send close
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: client-session, nchannels 1
Connection to lnaisq01.na.lafarge.net closed.
debug1: Transferred: stdin 0, stdout 0, stderr 47 bytes in 0.3 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 138.6
debug1: Exit status 1

C:\>