VCA change Datasource from SNMP to WEBM

[Alexander Bauer]

Hello

we are using HPSIM 5.3.
Other Server are conected to the HP SIM with SNMP.
The Client change from Time to Time from SNMP (done manualy) to WEBM, and lost the Information about the Trust by Server, and get certificate from Server.

[Rob Buxton]

Not sure what you are asking here.
Whether you use WBEM or SNMP does not affect the Trust By Certificate.

You can configure the HP SMH before you deploy it to contain the correct certificate. That can overwrite what's there.

[Alexander Bauer]

Hello

The Point is that in the Data Source the VCA Client change from SNMP to WBEM.

[City_Blue]

HI Alexander

i have seen this before you need to change the data source in the SMH page, once done it is ok

cheers

[Ralph Frampton]

Having just updated around 28 servers in the last week & seeing this exact issue... I think the OP has experienced the SMH SNMP/WBEM selection changing if the WBEM provider was installed/updated recently. After that install/update, the SMH will now default to WBEM & you have to go & reset it back to SNMP (it seems to work better with Integrated Mgmt Log etc.) in the Settings - Select SMH Data Source.