Server Management - Systems Insight Manager
1846619 Members
1303 Online
110256 Solutions
New Discussion

Re: Web-enabled Agent not working

 
Steve Battles_2
Occasional Contributor

Web-enabled Agent not working

I have roughly 10 identical servers (compaq ML350 G3). I'm running Insight Mgr v 5.5. All but one of the servers show that the web-enabled agent works. The only thing I've done on the oddball server is run the latest rompaq. Does anyone know how to get the web-agent working on this server? Running Windows server 2003. Thanks
4 REPLIES 4
Haridas
Respected Contributor

Re: Web-enabled Agent not working

Is the Webagent service running? If you have installed the 7.20 Management Agents, the please check if "System Management Homepage" and "Insight Management Agents" service is running.
Genius_2
New Member

Re: Web-enabled Agent not working

I too have just installed the Insight Management Agents (Version 7.2 from HP file: cp004791.exe) only to find the web agents not working.

Looking at the services running, I notice that "System Management Homepage" and "Insight Management Agents" not running, and there are no service entries for them. In relation to HP, I do have the following entries for:

HP Insight Event Notifier (Curiously disabled)
HP Insight Foundation Agents (Started)
HP Insight NIC Agents (Started)
HP Insight Server Agents (Started)
HP Insight Storage Agents (Started)
HP ProLiant System Shutdown Service (Started)

Does anyone have any suggestions on how to get the "Systems Management Homepage" and "Insight Management Agents" services running please?

TIA...

Silvester2
Frequent Advisor

Re: Web-enabled Agent not working

Funny,

I seem to miss the "HP Insight management agents" service...
I do have the "HP system Management Homepage" service up and running.
Could this be the reason why almost none of my management agents work?

Only the "NIC component" and the VC works.
the rest:
- Server component
- Storage component
- foundation component
Are not working..

Can i install this "HP Insight management agents" service manually?

Many thanks on forehand!
Rich Purvis
Honored Contributor

Re: Web-enabled Agent not working

I think this thread may be running in different directions.

Genius - you listed the CP for the agents - that will not get you the SMH 2.0. It is a separate component that has to be installed for the web portion of the Insight Agents to work in SS 7.20. I would suggest you install that component, it is in the 7.20 PSP, and see if that clears up some of your issues.

Silvester - in short the answer to your question is "yes"! Uh, I would suggest that you try and install the agent components in the 7.20 PSP - you can download them individually if you would like so you don't have to get the entire PSP. The NIC agent accounts for a relatively small amount of data that gets contributed to the overall management information presented in the SMH. If you don't have the other agents running you will not see a "large" part of what is available.

-Rich
Why does my tivo keep recording Nickelodeon?