CANT BOOT FROM NVME DISK WITH IPMITOOL in UEFI MODE

[hagaluly]

i have ProLiant XL225n Gen10 Plus with NVME disk

no matter what i tried server is not able to boot from disk

i have tried...

ipmitool raw 0x00 0x08 0x05 0x80 0x08 0x00 0x00 0x00

ipmitool chassis bootdev disk

ipmitool chassis bootparam set bootflag force_disk

chassis bootdev disk clear-cmos=yes

server is stuck on trying to boot from NIC and not proceeding to disk

does any1 knows how boot from disk can be accomplished? 

[Ihaqueit]

Is NVME disk recognized as UEFI mode or not?

Is any driver you installed NVME disk installation time?

[hagaluly]

1) NVME disk recognized as UEFI mode
2) no

issue is not related to that. im using ipmitool within the automation to controll the boot order.
in uefi mode ipmitool is useless and im unable to change between pxe and disk boot

[Ihaqueit]

Check out this.

mawagner ~ $ ipmitool -H 192.0.x.x -U USERID chassis bootdevPassword:bootdev <device> [clear-cmos=yes|no]bootdev <device> [options=help,...]none : Do not change boot device order
pxe : Force PXE boot
disk : Force boot from default Hard-drive
safe : Force boot from default Hard-drive, request Safe Modediag : Force boot from Diagnostic Partitioncdrom : Force boot from CD/DVD
bios : Force boot into BIOS Setupfloppy: Force boot from Floppy/primary removable media

mawagner ~ $ ipmitool -H 192.0.x.x -U USERID chassis bootdev cdromPassword:
Set Boot Device to cdrom

[hagaluly]

this command will not work as it will set boot mode back to legacy and disk was installed with OS uefi mode.

[Parvez_Admin]

Hello,

Please consider reaching out to HPE Support directly aswell for this issue, if not yet resolved.