help finding firmware or driver updatge package for 10Gb 2 port 562FLR-SFP+ controller

[cr4zyw3ld3r]

I was trying to get the firmware updated to patch the vulns found in HPESBGN04809 rev1
I tried doing so through the SUM package and downloaded the latest SPP but it did not find any updates for the NIC. I tried to run the Online Firmware Update for INTEL and it also fails.
Not entirely sure how to move forward from this since I know our fw version is quite dated at this time.

[Harshitha_K]

Hi  @cr4zyw3ld3r ,

Hope this helps!

Please find the HPE Intel Online Firmware Upgrade Utility for Windows, Linux and VMware which supports 10Gb 2 port 562FLR-SFP+ adapter.

Please find the HPE Intel i40ea Driver for Windows Server 2022 package

Note: HPE recommends the firmware provided in HPE Intel Online Firmware Upgrade Utility for Windows Server x64 Editions, version 5.4.4.1 or later, for use with the above driver.

For more information, please refer these links related to 10Gb 2 port 562FLR-SFP+

Thank you!

Hope this information has helped you, Please click on the "Thumbs Up/Kudo" icon as a token of appreciation. Also, if this post has helped to solve your issue, consider marking this as an "Accepted Solution".

[cr4zyw3ld3r]

It says in device manager that driver version is now up to v1.20.100.0 but does this mitigate the issues presented in HPESBGN04809 rev.1?
Because ilo still has our firmware version for the device as v10.57.2  where as it needs to go above v11.1.7