HP DL360 Gen9 ilo port question

[MrWrongchat]

I believe the ilo port can be set to "share' or "dedicated", correct? 

If so, how can I find which it is set to once signed into the server from the command line ( </>hpiLO-> ) ?

TIA. 

[support_s]

System recommended content:

1. HPE iLO 6 1.57 User Guide | iLO access settings options

2. HPE iLO 6 Security Technology Brief | iLO access settings options

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Moderator edit: Updated the link.]

[shiva_jr]

Hi @MrWrongchat 

I believe the ilo port can be set to "share' or "dedicated", correct?   
        YES
If so, how can I find which it is set to once signed into the server from the command line ( </>hpiLO-> ) ?
       Please use the HPE iLO command "GET_NETWORK_SETTINGS" or run the Get_Network.xml script to get the network detail.
For more information, please refer this document.
Regards,
Shiva_JR
Please mark as 'Accepted solution' and give me 'Kudos' if my post worked.

[MrWrongchat]

@shiva_jr 

Thank you, but it doesn't seem to be working:

</>hpiLO-> GET_NETWORK_SETTINGS

status=2
status_tag=COMMAND PROCESSING FAILED
error_tag=COMMAND NOT RECOGNIZED

Any other suggestions? 

[Mr_Techie]

@MrWrongchat 

It looks "GET_NETWORK_SETTINGS" is not recognized on your system.You can try another command to retrieve the network settings, such as: hpiLO-> SHOW NETWORK_SETTINGS

OR

You can try the below one. But which should include information about whether the iLO port is set to "shared" or "dedicated" mode: hpiLO-> SHOW /map1/enetport1

If none of these commands work, it's possible that the firmware version of your iLO may not support these commands, or there may be a specific command for your firmware version.

Let me know...