Servers - General
1748227 Members
4510 Online
108759 Solutions
New Discussion

Re: hp smart array p408i controller

 
papandos97
New Member

hp smart array p408i controller

Есть два одинаковых сервера hp dl 360 g7 с одинковыми настройками биоса, если подключить к ним карту fibre channel от компании Qlogic., то у одного сервера перестаёт иницилизроваться raid (smart array p408i), а на  другом всё работает корректно. Единственное отличие неработающего сервера от рабочего, что у первого объёма оперативной памяти больше, производительнее процессор.Если убрать карту то raid работает корректно. 

 

Google Translate
There are two identical hp dl 360 g7 servers with the same BIOS settings, if you connect a fiber channel card from Qlogic to them,
then one server stops initializing raid (smart array p408i), and on the other everything works correctly.
The only difference between a non-working server and a working one is that the first amount of RAM is larger
the processor is more productive. If you remove the card, then the raid works correctly.
1 REPLY 1
Jazz_ISS
HPE Pro

Re: hp smart array p408i controller

"Smart array p408i" is not supported on DL360 G7 as per HPE Quickspecs.

List of supported controllers are mentioned on Page 27
https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04284501

I suggest use a supported controller and check for issue resolution.
In addition keep the server patched with latest "HP Service Pack for ProLiant"


I work for HPE

Accept or Kudo