HPE 10GBase-T SFP+ Transceiver 813874-B21 Server Version

[mausfed]

We need to find a transceiver with the same characteristics of the following 10 GBase-T SFP+

813874-B21 Compatible 10GBASE-T SFP+ Module (Copper, 30m, RJ-45)This 813874-B21 compatible 10GBASE-T Copper SFP+ transceiver is designed for use with HPE BladeSystem networking equipment such as 10 Gigabit Ethernet (10 GbE) Switches, Routers, Network Interface Cards (NICs) and 10G Ethernet Media Converters. It is programmed and tested to perform identical to the original HPE BladeSystem 813874-B21 10G SFP+ copper transceiver and provide a cost-effective replacement. It’s specifically designed for high speed 10 Gigabit Ethernet communication over Cat 6a / Cat7 cable. It is compliant with the Multi-Source Agreement (MSA) and 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T standards as specified in IEEE STD 802.3an, 802.3ab and 802.3au.

Is there any compatible with the following Network adapters?

HPE Ethernet
10Gb 2-port
530SFP+ Adapter
(652503-B21),
HPE FlexFabric
10Gb 2-port
534FLR-SFP+
Adapter
(700751-B21)

HPE Ethernet
10Gb 2-port
546FLR-SFP+
Adapter
(779799-B21),

HPE Ethernet
10Gb 2-port
546SFP+ Adapter
(779793-B21)

HPE Ethernet
10Gb 2-port
560FLR-SFP+
Adapter
(665243-B21),
HPE Ethernet
10Gb 2-port
560SFP+ Adapter
(665249-B21)
HPE FlexFabric
10Gb 2-port
556FLR-SFP+
Adapter
(727060-B21)
HPE Ethernet
10Gb 2-port
562SFP+ Adapter
(727055-B21),
HPE Ethernet
10Gb 2-port
562FLR-SFP+
Adapter
(727054-B21)
HPE Ethernet
10Gb 2-port
537FLR-SFP+ Adapter
(P08440-B21),
HPE Ethernet 10Gb
2-port 537SFP+ Adapter
(P08421-B21)
HPE Ethernet
10/25Gb 2-port
640SFP28
Adapter
(817753-B21),
HPE Ethernet
10/25Gb 2-port
640FLR-SFP28
Adapter (817749-B21)
HPE Ethernet
10/25Gb 2-port
631FLR-SFP28
Adapter
(817709-B21),
HPE Ethernet
10/25Gb 2-port
631SFP28 Adapter
(817718-B21)
HPE Ethernet
10/25Gb 2-port
621SFP28 Adapter
(867328-B21),
HPE Ethernet
10/25Gb 2-port
622FLR-SFP28
Converged Network
Adapter (867334-B21)

[parnassus]

Hi! I strongly doubt that that specific 10GBase-T SFP+ Transceiver (RJ45 port) is supported on any of Network Adapters you listed.

Just an example, the 813874-B21 Transceiver is referenced at pages 40, 41 and 42 of the HPE Synergy Cabling Guide (May 2020, Ediiton 8)...that's for a Server application...and here if used on Comware based Switch series.

If your purpose is to use it on a SFP+ Network Adapter (used, as example, on a HPE ProLiant server) to connect to your 10G networking infrastructure by using Cat. 6 cabling...I guess it's probably safer to deploy your server with a proper 10GBase-T ports Network Adapter such as (see here, here and here)...clearly it all boils down to your specific networking restrictions (question: 10GBase-T interfaces only switch side? no whatsoever 10G Fiber Optic LC ports switch side?).

Moderator [above links are no longer valid, please visit https://support.hpe.com/connect/s/  to find the latest info ]

[Leeshin]

Anyone able to confirm if the ""SKU #813874-B21HPE 10GBase-T SFP+ Transceiver""  will work for the HPE DL360 server - HPE Ethernet 10Gb 2-port 530SFP Adapter  ??

Thanks

[Leeshin]

Have you found a solution (transceiver to copper) for your HPE gen 10  530SFP Adapter ?

[mausfed]

Hello, 

We moved on and now we are testing new hardware. (D.) The HPE 10GBase-T SFP+ Transceiver 813874-B21 Server Version didn't work in any HPE Network adapter but it works in generic adapters.  I contacted HPE Support, HPE sales representative  and HPE hardware planner for our appliances but we got no solutions.

so we are using in the HP DL360 and  DL380  the following adapters 

652503-B21 HPE Ethernet 10Gb 2-port 530SFP Adapter

HPE Ethernet 10Gb 2-port 530T Adapter 

it's been a month and the  HPE 10GBase-T SFP+ Transceiver 813874-B21 works great in the Intel(R) Ethernet 10G 4P X710 OCP

we want to use one adapter instead of two. 

regards.