I just took over a site and I not sure if the RAID aray and volumes are set up correctly.

[Michaeltoshi]

I hope I selected the correct location for this problem....
I just took over a site that hase two seperate locations. Each location has its own server (sorely outdated). The servers are access through HP Server Manager.
The drive (HP LOGICAL VOLUME SCSI Disk Deise) has capacity of 419 GB that is 100% allocated. Bus type is RAID.
It has 3 virtual disk: 1. has 419 GB capacity- 1.00 MB unallocated- Partition MBR. Bus type is RAID
2. has 419 GB capacity- 0.00B unallocated - Partion MBR. Bus type is RAID.
3. is exact same as #2.
G: drive has capacity of 419 GB and 380 GB free space
C: drive has capacity of 419 GB and 23.4 GB od free space.
E:drive has 419 GB capacity and 409 GB free space.

The system is doing odd things and not communicating with the programs correctly.

Should I start with defragment/optimize drive and disk clean up. I have no idea how long it has been since anything was done to thw system.

I feel like the RAID array and memory wasn't set correctly.

Can someone please point me in the right direction. I'm new to the industry and way over my head. Thanks in advance!

[Mahesh202]

Hi Michaeltoshi

Could you please provide the model information for this HPE Storage Array?

Regards
Mahesh

[Tam92]

Hello,

As requested, could you provide the Server model, HDD models , Storage controller model and what kind of RAID would you like to achieve here ?

Thanks,
TAM

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".