Servers - General
1833814 Members
2181 Online
110063 Solutions
New Discussion

MicroServer Gen8 depoly Samba Server than powerlost

 
Nyx1197
Occasional Advisor

MicroServer Gen8 depoly Samba Server than powerlost

MicroServer Gen8 depoly Samba Server than powerlost
I try depoly Samba Server on MicroServer Gen8 to share my disk. When other PC write some large file to share folder, the server lostpower. all led go out, and power button not respon. ILO also don't work. I need disconnect powercable and wait minutes, than reconnection powercable and poweron server.


server configuration:
CPU: Intel Xeon E3 1260L
RAM: HPE SmartMemory 8G x2
TF: Sandisk ultra 64g
Nvme: YMTC tiplus5000
HDD: old 3.5 inch HDD
System: PVE 7.2-11

I already do stuff to try fix that
replace powersupply
replace HDD
reformat disk part to ext4 or ntfs
reinstall ubuntu on VM
install Samba on lxc
reconnected inside plug
add a fan to sourth bridge
replace CPU to original G1610
replace RAM to original 4G RAM
use stress-ng test CPU, RAM, HDD
use iperf3 test network

my english not well, i'm so sorry~
thanks for your help

 
 
6 REPLIES 6
Suman_1978
HPE Pro

Re: MicroServer Gen8 depoly Samba Server than powerlost

Hi,

As you have performed most of them troubleshooting, here are some documents which might help.

You have mentioned as "CPU: Intel Xeon E3 1260L", this processor is not supported on MicroServer Gen8, please check the QuickSpecs.

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
Nyx1197
Occasional Advisor

Re: MicroServer Gen8 depoly Samba Server than powerlost

thanks for your help!

I will replace CPU to original G1610 again. And I will reply in 3days, because i can't touch this server today.

Nyx1197
Occasional Advisor

Re: MicroServer Gen8 depoly Samba Server than powerlost

I try replace CPU, but it's not working.

When it happen, network is strange. I send a file to samba server, transport speed just only 10M/s, Not 100M/s.
Maybe with a dead network card?

Suman_1978
HPE Pro

Re: MicroServer Gen8 depoly Samba Server than powerlost

Hi,

It could be the NIC issue, but is the server working after installing the original CPU?

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
Nyx1197
Occasional Advisor

Re: MicroServer Gen8 depoly Samba Server than powerlost

No, it stuck again. Even I not start any VM.

I restore server hardware configuration to default, include bios configuration. And replace TF card, reinstall Ubuntu Mate 20.04, remove all HDD.

I hope it works.

Nyx1197
Occasional Advisor

Re: MicroServer Gen8 depoly Samba Server than powerlost

It's hardware issue. It looks like a problem with the motherboard. I replace everything without motherboard and case, but still not working.