HPE Community
Servers - General
1825721 Members
3129 Online
109687 Solutions
New Discussion

mixed SSD and SAS disks within the array

 
ramyali
Occasional Contributor

‎02-09-2020 04:21 AM

‎02-09-2020 04:21 AM

mixed SSD and SAS disks within the array

i need to replace SAS disks running wth new SSD disks 

Do this applicaple on DL160 G9 server?

please advise.

0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

‎02-09-2020 05:47 AM

‎02-09-2020 05:47 AM

Re: mixed SSD and SAS disks within the array

SATA / SAS and HDD/SSD cannot be mixed.
Consider backup/ restore or clone.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
AmRa
HPE Pro

‎02-10-2020 03:27 AM - edited ‎02-10-2020 03:28 AM

‎02-10-2020 03:27 AM - edited ‎02-10-2020 03:28 AM

Re: mixed SSD and SAS disks within the array

Hi 

In addition to above information, please refer HPE ProLiant DL160 Generation9 QuickSpec (Page number 24) for compatibility SSD drive with this server.

https://h20195.www2.hpe.com/V2/Getdocument.aspx?docname=c04375607

 

I am an HPE Employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo
0 Kudos
Reply
Ryal1s
New Member

‎02-13-2020 12:32 AM - edited ‎02-13-2020 12:34 AM

‎02-13-2020 12:32 AM - edited ‎02-13-2020 12:34 AM

Re: mixed SSD and SAS disks within the array

If you can live with the fact if you need to rebuild it may take the entire array with it TalkToWendys.

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.