Ml 350p gen 8 processor upgrade

[groovadelik]

hello everyone

I find myself having a problem with a processor upgrade, I would like to switch from an E5 2609 v1 to an E5 2667 v2, but the machine does not boot (even on the bios) the server remains in default.

all motherboard updates have been done.

if you have any ideas of the problem

cordialy cyril

[TVVJ]

Hello,

As the server does not complete POST, it is recommended replace the processor that was installed previsouly and check if it boots to the operating system. If it does boot, then upgrade the server's iLO and BIOS and then proceed to perform the hardware uipdate.

Regards,

[groovadelik]

@TVVJ 

hello, and thank you for the answer,

that's exactly what I did, but it didn't work, logically all the motherboard is up to date on firmware and bios

[TVVJ]

Hello,

As you have already performed this step, it is recommended that you contact HPE Support, detailing the steps done and the result at each step for further assistance.

Regards,

[Libby69]

Check this out, htis might help : https://www.hpe.com/psnow/doc/c04128239.pdf?jumpid=in_lit-psnow-getpdf&qsVersion=6&ver=6/AvalonAccess Login