ML110 SmartArray P408i-p SR Gen10 firmware upgrade

[chrisnagasawa]

I have an ML110 with a SmartArray P408i-p running firmware 1.65. The logical drive crashed losing all data. I replaced the alleged bad drive. When I rebuild using RAID-1, the data sync goes to 99.45% then the logical drive crashes and loses all data. I reviewed a bulletien that says I need to upgrade the firmware. How do I upgrade the P408i-p firmware? I am upgrading using System Utilities>Embedded Applications>Select a device to update>Firmware Update>Slot 3: HPE Smart Array P408i-p SR Gen10>Select a firmware file....

Where can I get the firmware file?

[TVVJ · Accepted solution]

Hello,

You may try using the ".fw" file extracted from the online ROM Flash Component for Windows (x64) for this controller.

Download and extract the contents to a folder and use the file named "HPE_luxor.bin.fw" and see if you have success.

Regards,

[chrisnagasawa]

TVVJ,

That worked great!

Thanks,

Chris

[Sunitha_Mod]

@chrisnagasawa 

Hello Chris, 

Excellent! We are glad to know the issue has been resolved.