Proliant DL380p Gen8 Additional 2 SFF Rear HDD Cage

[Cobra-ZX12R]

I have several Proliant DL380p Gen8 that I would like to add the 2 sff rear hdd cage, that mounts in either the Primary or secondary riser.

HPE DL380p Gen8 Rear 2.5" SFF Drive Bay. This mounts in rear PCI-e riser area.

On the 8 SFF Chassis -- I will also need the proper SAS cable to plug into the secondary P420 SAS controller w/ 1GB BBWC.

On the 16 SFF Chassis -- I have a 12G SAS Expansion card in server. I will also need the proper SAS cable to plug into Port 9 on 12G SAS Expansion card.

Here are model numbers of the rear SFF drive cages to related server model numbers ---- The version for the DL380 G10 is what I'm looking for

          871819-001 DL380 G10 Riser w/ 2 bay sff drive cage

          719074-B21 DL380p Gen9 2 sff cage w/ backplane

          777840-001 DL390 G9 2 bay sff drive cage

          663280-B21 DL380e Gen8 rear 2 sff form factor kit

If anyone can verify the proper part number needed to get the additional SFF rear HDD cage, it would be greatly appreciated.  I have seen the option installed in a DL380p Gen8, but can not get the official part numbers.

Thank You for the assistance,

Wallace

[ksram]

Hi @Cobra-ZX12R ,

Please check the below links if they are hepful : 

https://support.hpe.com/hpesc/public/docDisplay?docId=c03235291&docLocale=en_US
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c03247174

If need more information would best to log a Case with HPE,

Thank you
RamKS