HPE Community
Servers - General
1822743 Members
3954 Online
109645 Solutions
New Discussion юеВ

ProLiant DL380p Gen8 cant install boot into uefi

 
Ali_ElHusseiny
Occasional Contributor

тАО07-26-2021 12:19 AM

тАО07-26-2021 12:19 AM

ProLiant DL380p Gen8 cant install boot into uefi

Hello,

I am trying to install windows server 2016 on dl380 gen8 server but iam not able to boot into uefi with it,

any fix for that?

0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО07-26-2021 02:02 AM

тАО07-26-2021 02:02 AM

Re: ProLiant DL380p Gen8 cant install boot into uefi

There is no UEFI mode on this server model. UEFI started with Gen9 on Proliant.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
Ihaqueit
Trusted Contributor

тАО07-26-2021 08:02 AM

тАО07-26-2021 08:02 AM

Re: ProLiant DL380p Gen8 cant install boot into uefi

For anyone interested we found solution in this article, by moving MBR partition to external USB drive http://woshub.com/booting-windows-7-from-a-gpt-disk-using-bios-firmware-non-uefi/

I Haq
Reply
Wade225
Occasional Visitor

тАО08-05-2021 05:14 AM - last edited on тАО08-31-2021 12:52 AM by

тАО08-05-2021 05:14 AM - last edited on тАО08-31-2021 12:52 AM by

Re: ProLiant DL380p Gen8 cant install boot into uefi

This works really well for us, thank you!

 

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.