Proliant MicroServer Gen10 Plus OS Installation HELP

[Early]

Hi There, just got a MicroServer Gen10 Plus . I plugged 2 SATA Disk in the Bays in Front. I activate the Smart Array S100i SR Gen10 SW RAID in Setup, boot is UEFI. I create Raid 0 wih the 2 Disks. But then by OS Installing shows no Drives. I download already the drivers for Smart Array S100i SR, it´s working but still no disks to install OS. I tried with 2 different win version , still the same. Any ideas why I can´t see the Drive by Windows installing ? 

Thanks

[support_s]

System recommended content:

1. HPE ProLiant MicroServer Gen10 User Guide

2. HPE ProLiant MicroServer Gen10 Plus User Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Early · Accepted solution]

Thanks for your help, I founf the solution. I just got the wrong drivers . The right one is cp037222.exe

[Sunitha_Mod]

Hello @Early, 

Excellent! We are glad to hear you found the solution and thank you for updating us.