Reinicio servidor HP Proliant ML30 Gen9 por Upgrade de Memoria

[matias838]

Hola a todos,

Sumé un módulo de memoria de 8GB a mi Servidor Proliant ML30 Gen9 y cuando comienza a cargar la Bios en la parte de "Memory Start" se reinicia el Servidor y entra en un Loop.

El modulo de memoria que estoy agregando, que me regalaron, dice como descipción lo siguiente...

8GB 1Rx4 PC4-2400T- RC2- 12
KTH-PL424/8G
1.2V

Saben que puede ser? Me dijeron que era compatible con el servidor.

Gracias desde ya por su ayuda.

Jonás

Google Translated

Hi everyone,

I added an 8GB memory module to my Proliant ML30 Gen9 Server and when it starts to load the Bios in the "Memory Start" part the Server restarts and goes into a Loop.

The memory module that I am adding, that they gave me, says as a description the following ...

8GB 1Rx4 PC4-2400T- RC2- 12
KTH-PL424 / 8G
1.2V

Do you know what it can be? They told me it was compatible with the server.

Thanks in advance for your help.

Jonah

[Suman_1978]

Hi,

According to your supplied info KTH-PL424 / 8G, this is the memory.
https://www.kingstonmemoryshop.co.uk/kingston-8gb-ddr4-kth-pl424-8g-reg-ecc-ram-memory-dimm

Always refer to HPE product QuickSpecs for compatible parts.
https://www.hpe.com/psnow/doc/c04834991

Supported DIMM modules as per QuickSpecs:
HPE 8GB (1x8GB) Single Rank x8 DDR4-2133 CAS-15-15-15 Unbuffered
HPE 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Unbuffered

Please check if your DIMM's are compatible and if YES, do check the Population order, also check if the Processor supports the DIMM from Kingston.

Thanks

[pmoisset]

This is kind of necroposting but it may help others:

I had essentially the same issue while installing a NEMIX 16GB DDR4-2666 ECC UDIMM Memory module in an  HP Proliant ML30 gen 10 server. Upgrading the BIOS fixed the problem.