Specific model NIC FW is not included in new SPP

[yellow02]

Hello Team,

Why is the NIC FW of the following NIC model not included in the new Bundle package?

The new SPP(SPP2024.04.00.00) does not contain the FW for this NIC model, is there a way to check?

Are there any plans to include this FW(5.3.3.30)  in a patch bundle?

HPE Intelオンラインファームウェアアップグレードユーティリティfor Windows Server x64 Editions（HPE ProLiant Gen9およびGen10サーバーシリーズ専用）。 | HPE Support

This software package no longer contains Firmware for the below listed supported network adapters:

HPE Ethernet 1Gb 2-port 363i Adapter       

HPE Ethernet 1Gb 4-port 366i Adapter     

HPE Ethernet 1Gb 4-port 366i Communication Board       

HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter

HPE Ethernet 10Gb 2-port 560SFP+ Adapter     

HPE Ethernet 10Gb 2-port 561FLR-T Adapter    

HPE Ethernet 10Gb 2-port 561T Adapter

[Suman_1978]

Hi,

Why these Network cards FW is removed? I think this is the answer.

Will the version 5.3.3.30 be in a Patch bundle? May be not.

Thank You!
I work with HPE but opinions expressed here are mine.

[yellow02]

Thank you!

I hope include this FW. Because it is Installed in Gen10 server.

[Rama2]

The exclusion of specific firmware updates for certain adapters in a Service Pack for ProLiant (SPP) version may be due to several reasons. 

Refer to the Release Notes for Gen10 Service Pack for ProLiant, v2023.09.00.00 :- https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00134495en_us

The SPP v2023.09.00.00 software package no longer contains firmware for the following supported network adapters:
HPE Ethernet 1Gb 2-port 361i Adapter
HPE Ethernet 1Gb 2-port 363i Adapter
HPE Ethernet 1Gb 4-port 366i Adapter
HPE Ethernet 1Gb 4-port 366i Communication Board
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
HPE Ethernet 10Gb 2-port 560SFP+ Adapter
HPE Ethernet 10Gb 2-port 561FLR-T Adapter
HPE Ethernet 10Gb 2-port 561T Adapter
For the latest firmware version of the above adapters, please refer to this link.
https://support.hpe.com/connect/s/softwaredetails?language=en_US&softwareId=MTX_4e8
4847286af4760911448c7a0&tab=releaseNote

You can create custom SPPs including these firmware for upgrades