UPS Network Module AF465A - Firmware upgrade

[Andy Haigh]

Hi,

We are looking to upgrade the Firmware on the UPS network modules AF465A in an R3000 and R5000 UPS's

My believe was this will just cause the Management Module to restart and not shutdown the UPS itself, but some online reading had made me doubt this.

Could someone please confirm what will happen for me.

Thanks

Andy

[support_s]

System recommended content:

1. HPE UPS Network Module - Installation

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Andy Haigh]

Not relevant, the modules are already installed.

We are asking about Firmware upgrade - does it cause the UPS to reboot.

[GM_M]

Hi Andy Haigh ,

Yes, the appliance needs to be restarted for the updates to take effect.
For more information on system requirements and intallation of firmware please refer to the following link
https://support.hpe.com/connect/s/softwaredetails?language=en_US&softwareId=MTX_66a5cdc4a9da4bdba4e89d0383&tab=Installation%20Instructions

Thank you.
Manoj.