UPS NMC AF465A Hardware reset?

[MisterScience]

Hi,

I have recently bought a secondhand AF465A NMC for my HP R1500G3 UPS.

However, the NMC has a password set, and the original owner does not know it. Is there any way to reset the module? It does not seem to have a reset button, or any visible jumpers on the board.

Is it possible to factory reset the card using a management cable?

[Suman_1978]

Hi,

I could not find a solution on resetting the password on this NMC.

But the default user name and password in admin

https://support.hpe.com/hpesc/public/docDisplay?docId=c02881337
https://support.hpe.com/hpesc/public/docDisplay?docId=c04111557
https://support.hpe.com/connect/s/softwaredetails?language=en_US&collectionId=MTX-58061ce544304dbd
https://support.hpe.com/hpesc/public/docDisplay?docId=c02867104
https://support.hpe.com/hpesc/public/docDisplay?docId=c02881291

May be other community members who know the solution can shed some light.

Thank You!
I work with HPE but opinions expressed here are mine.

[MisterScience]

Thank you for the reply, that was what I was worried about.

I'll leave the post up for a few days before accepting your solution just in case anyone has a ray of inspiration:)

[BPSingh]

Greetings!

Can you log in using a serial cable with the default password "admin"? If so, you should be able to set a new password.

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.