HPE Community
Software Defined Networking
1751721 Members
5998 Online
108781 Solutions
New Discussion

How to use "SET_QUEUE"

 
SOLVED
Go to solution
armandom
Advisor

‎02-11-2014 05:50 PM

‎02-11-2014 05:50 PM

How to use "SET_QUEUE"

Hi

 

Anyone have an example of how can I create a flow with the action "SET_QUEUE" and see the queue counters.

 

I use RSdoc and switches 3800 version 15.14.003 OpenFlow version 1.3

 

 

 

thank you

0 Kudos
1 REPLY 1
Gerhard Roets
Esteemed Contributor

‎02-12-2014 04:28 PM

‎02-12-2014 04:28 PM

Solution

Re: How to use "SET_QUEUE"

Hi Armandom

 

SET_QUEUE is not supported on the 3800 platform.

 

This is documented in the "HP Switch Software OpenFlow Administrator’s Guide for K/KA/WB 15.14" which is on the HP web site.

 

Search for "Unsupported features:" in the document or you can look for the "Supported RFCs and standards" section in Chapter 1 Introduction.

 

Hope this helps

Gerhard

The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.