This widget could not be displayed.
Software Defined Networking
1845514 Members
3271 Online
110244 Solutions
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
New Discussion
This widget could not be displayed.
This widget could not be displayed.

Node Dropdown Box on OpenFlow Topology Missing

 
SOLVED
Go to solution
DLWood-HP
Occasional Visitor

Node Dropdown Box on OpenFlow Topology Missing

Hi All,

 

I am trying to figure out why I am not seeing ip addresses for my end nodes. I do not see the 'Node Dropdown box' that allows you to choose between mac/ip/none view, in the topology view (see screenshot).

 

Version: 2.4.6.0627

3x Comware Based 5900CPs running latest code: Version 7.1.045, Release 2311P05

 

openflow instance 1
mac-ip dynamic-mac aware
datapath-id 1111111111111111
classification vlan 100
controller 1 address ip <ip>
#

 

Any ideas?

3 REPLIES 3
piricchio72
Valued Contributor
Solution

Re: Node Dropdown Box on OpenFlow Topology Missing

Hello,

 

Clicking on the question mark you see on the top of the topology page a list of shortcuts will appear.

If the focus is on the topology page, typing "n" will show you nodes' IPs.

Typing "n" a second time you will see their MAC-address.

 

Regards,

 

Antonio

SDN Team

DLWood-HP
Occasional Visitor

Re: Node Dropdown Box on OpenFlow Topology Missing

Awesome, that worked great.  Should I see that dropdown box in 2.4.6? or was that removed?

 

piricchio72
Valued Contributor

Re: Node Dropdown Box on OpenFlow Topology Missing

Hello,

 

The dropbox has been removed.

 

Regards,

 

Antonio

SDN Team