Shutdown and Power OFF SAN with SSSU commands

[fricke-j]

Hello! We are looking for a way to shutdown and power off a SAN per script, wich will be started by a UPS application in case of a power failure. I read something about SSSU commands, but I can't find the reference guide or sample scripts.

Does anyone have a link to the reference guide or some sample scripts?

Thanks,

Jens

[Sheldon Smith]

For the manual, go to http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=us&docIndexId=179111&taskId=101&prodTypeId=12169&prodSeriesId=471497 (or http://www.hp.com/go/storage > Enterprise > HP StorageWorks 4000/6000/8000 Enterprise Virtual Arrays > HP StorageWorks Command View EVA Software > Manuals) and click on "HP StorageWorks Storage System Scripting Utility Reference Guide (T3724-96063, July 2006)"

[fricke-j]

Thanks for the link! This is what i'm looking for.

[CA881997]

I looked at the script document, and I found the shutdown command to shutdown a controller, similar to hsg80 , but didn't see the power off for the SAN. If you find that please reply. I was hoping to have our UPS run the batch file to execute the SSSU command too.