Storage
Hewlett Packard Enterprise Data Storage Solutions and Products
1849007
Members
6560
Online
104040
Solutions
Latest Articles and Discussions
msa30 serial number in msa1500 enviroment
Posted to: Disk Enclosures
03-31-2008 does anyone know if it is possible to input the serial number of a replaced MSA30 shelf so that it shows up in the "Show version -all" command as displayed below:COHHPMSA01-RIGHT> show version ...
0
Kudos
621
Views
1
Reply
msa1500 cli commands
Posted to: Disk Enclosures
03-31-2008 Are there CLI commands to enable cache batteries on msa1500's? see attached show THis controller output:Cache: 0 megabyte read cache 512 megabyte write cache Version 2 Cache is GOOD, and C ...
0
Kudos
815
Views
1
Reply
HP NAS 1200
Posted to: StoreEasy Storage
03-31-2008 I picked up an HP 1200 NAS from Ebay. It did not come with an OS, so I loaded openfiler from a USB CDROM. It installed fine but after 5 minutes while loaded, it just reboots with the error "Fai ...
0
Kudos
520
Views
2
Replies
SSSU ADD SNAPSHOT with dynamic date field name
Posted to: Storage Software
03-31-2008 Does anyone out there know if it is possible to throw some kind of wildcard or use a date variable for snapshot scripting? If you select disks in RSM GUI and create snapshots or through commandvi ...
0
Kudos
1404
Views
3
Replies
Configure raid devices - logical volumes 6402
Posted to: Disk Enclosures
03-31-2008 I have a MSA30 with an 6402 Smart Array controller.Thru saconfig I have created 6 RAID 1 devices.Which come up logical devices. # RAID Size Status 0 1+0 69460 MB OK ...
0
Kudos
857
Views
6
Replies
disabling telnet on Brocade fibre switch
Posted to: HPE EVA Storage
03-31-2008 We would like to disable telnet on our Brocade (OS 5.3.0a) fabric and use ssh for security. I ran the command "ipfilter --addrule blockTelnet -sip any -dp 23 -proto tcp -act deny"and after activ ...
0
Kudos
9672
Views
5
Replies
