Storage
Hewlett Packard Enterprise Data Storage Solutions and Products
1848653
Members
7819
Online
104035
Solutions
Latest Articles and Discussions
DLT I/O Errors
Posted to: StoreEver Tape Storage
05-15-2002 I have a DLT8000 tape drive and I'm getting an I/O error on an (Oracle) datafile. I do the DD if=xxxx of=/dev/null and everything checks out?Then, I run the same backup to disk and it runs OK?T ...
0
Kudos
288
Views
1
Reply
Mounting DAT units as volumes under 2K/XP
Posted to: StoreEver Tape Storage
05-14-2002 G'day guys,I have a surestore dat24i that i wish to use as a streaming device (lots of video). All the data will be accessed sequentially, so no need to worry about seek times, etc... speed is ...
0
Kudos
375
Views
2
Replies
Sure e 4/40 On SAN
Posted to: Automated Backup
05-14-2002 The unix guy have a HP Sure E 4/40 on a san. I would like to use the device to back NT file servers that is not on the san. What would i need to do so. Thanks Cecil Maddsion
0
Kudos
2411
Views
4
Replies
adding a drive
Posted to: HPE ProLiant Storage Systems
05-14-2002 What are the steps to adding a hot swappable hd to my 4354R Enclosure? I simply want to expand the drive...I'm running RAID5 on a 5300 controller
0
Kudos
461
Views
1
Reply
Poor Performance + internal/external Raid
Posted to: Disk Enclosures
05-14-2002 Proliant DL380 G2 Smart Array 5i Internal Drives: 2 x 18 GB, 10K rpm (Raid 1 mirror) Firmware: 1.8 The Insight manager says that all is ok. We are using the latest drivers, Support Paq, Rom Paq. ...
0
Kudos
353
Views
0
Replies
Replace 9GB (raid1) with 18GB (raid1)
Posted to: Disk Enclosures
05-14-2002 My config : 2 x 9GB in RAID1 I would like to change them with 2 x 18GB What I DO: 1. I change one HD 9GB by 18 GB --> Rebuild 2. idem with second HD --> Rebuild I have now a raid1 (9GB) on ...
0
Kudos
287
Views
1
Reply
