StoreEasy Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

restore NAS1200S OS

 
Highlighted
Occasional Contributor

restore NAS1200S OS

I'm trying to restore the OS into a NAS1200s.
The boot process , from the usb device, stops with the folowing error. "cannot load usb storage device"

Pressing esc the screen with option Q to continue appears. I pressed the Q and the drives have been reinitialized . Unfortunately then the process cannot load the new OS , and now the NAS is unbootable

This is very urgent .
Any help is greatly appreciated
Thanks

Stefano Colombo
5 REPLIES 5
Highlighted
New Member

Re: restore NAS1200S OS

Dear Stefano:
I have the same problem pls lat me know if you have finded any solution
Pere
Highlighted
Valued Contributor

Re: restore NAS1200S OS

I'm attaching the Release Notes and Quick Restore Instructions for 1200s. First thing to suggest, check your external attached USB DVD model. From the 1200s Quick Spec (also attached), only the HP dvd300e is supported. If you are okay here, then review the Release Notes (see last page) and the Quick Restore instructions. Re-attempt the restore process. Two tips: 1) be patient, it takes a while, 2) be present to remove the Quick Restore Disc from the DVD drive when the install is 100% and the dvd drive opens the tray. Hope this helps!

Highlighted
Valued Contributor

Re: restore NAS1200S OS

Sorry Stefano, I can only send one attachment at a time. Here's the Release Notes.
Highlighted
Valued Contributor

Re: restore NAS1200S OS

Here's the Quick Restore instructions for the 1200s.
Highlighted
New Member

Re: restore NAS1200S OS

Dear Stefano:
It works if you use any HP USB DVD player or recorder i thing it is a problem because not all the users has an HP USB recorder player but is the only way to restore the system.
Pere