StoreEver Tape Storage
1821820 Members
3580 Online
109638 Solutions
New Discussion юеВ

1/8 G2 Tape Drive Compatibility

 
Michael Lynch_1
Occasional Contributor

1/8 G2 Tape Drive Compatibility

I have an older HP Storageworks 1/8 G2 Tape Autoloader with an Ultrium 4 tape drive in it. I would like to upgrade this drive to an Ultrium 6. How can I find out if it is compatible with my hardware? Also, am I correct in that an Ultrium 6 drive can read LTO 4 tapes?

7 REPLIES 7
Torsten.
Acclaimed Contributor

Re: 1/8 G2 Tape Drive Compatibility

make sure firmware is up to date and upgrade up to LTO8.

each drive can write generation -1 and read gen-2

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Michael Lynch_1
Occasional Contributor

Re: 1/8 G2 Tape Drive Compatibility

Thanks for responding. I don't want to go to LTO8 because I understand it can't read LTO4 tapes. I have a large archive of them that I need access to. Does it matter how old the media server I, as regards updating the tape drive to LTO6?




Michael Lynch

IT Director

D. 215.717.3638 | M. 215.284.2243 | O. 215.925.3788



[X]

Facebook | Twitter | LinkedIn | Google+
Torsten.
Acclaimed Contributor

Re: 1/8 G2 Tape Drive Compatibility

see the quickspec what FC and SAS controllers are supported for the drive and server.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Michael Lynch_1
Occasional Contributor

Re: 1/8 G2 Tape Drive Compatibility

Torsten,

 

Thanks again for your kind response. If you could shoot me a link to those quickspecs, I would be very appreciative.

 

Michael

Torsten.
Acclaimed Contributor

Re: 1/8 G2 Tape Drive Compatibility

Autoloader

https://h20195.www2.hpe.com/v2/Getdocument.aspx?docname=c04123291

 


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Curtis_Ballard
HPE Pro

Re: 1/8 G2 Tape Drive Compatibility

All 1/8 G2 autoloaders are hardware compatible with all of the tape drive upgrades for any of the MSL G3 tape libraries such as an MSL 2024 or MSL 4048 as long as the firmware in the 1/8 G2 is new enough.  Most of the documentation and compatibility lists do not show drive upgrade options for the 1/8 G2 autoloader as the cost of a new autoloader is so close to the upgrade drive cost that upgrades are not expected.

I don't have a handy cross reference showing what firmware versions are required for the various drive types but if your firmware version date is 2013 or newer then it should support LTO-6.

I work for HPE.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
WilliamSmith11
Super Advisor