StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Default Password for a MSL 2024

 
Highlighted
Occasional Contributor

Default Password for a MSL 2024

I received my tape library and the front LCD was damaged point is I am trying to logon with the web-interface (admin). I've searched and searched but can't find it.

Paul
4 REPLIES 4
Highlighted
Acclaimed Contributor

Re: Default Password for a MSL 2024

According to the manual, you must set the password from the front panel first:

"Before using the RMI (remote management interface), you must configure the device's networking and set the administrator password with the OCP"

http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=1809913&targetPage=http%3A%2F%2Fh20000.www2.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc00908870%2Fc00908870.pdf

page 51

You can also try "00000000".

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Regular Advisor

Re: Default Password for a MSL 2024

Highlighted
Honored Contributor

Re: Default Password for a MSL 2024

There is no default RMI password. Using all zeros as has been reported several times is not supposed to work and hasn't on the units I've tried.

With the latest firmware you should be able to call HP tech support and have them generate a temporary password then you can log into the web interface as admin and set a password. I haven't tried that feature yet though.
Highlighted
New Member

Re: Default Password for a MSL 2024

Very simple.
go to the tape and set the admin password from there, go back to you pc and use it.
Thanks
Ismael