HPE Community
StoreEver Tape Storage
1819829 Members
3134 Online
109607 Solutions
New Discussion

Re: How to Update Firmware of LTO5 Ultrium Drives in an MSL4048

 
WinstonWolf
Occasional Contributor

‎02-01-2016 03:17 AM

‎02-01-2016 03:17 AM

How to Update Firmware of LTO5 Ultrium Drives in an MSL4048

Hello , 

First Question where i can become the latest Firmware for an MSL4048 and for StoreEver LTO5 FC and SAS Tape Drives ? 

Second Question , when i try to Update the Firmware over the MSL4048 Web Console , with this Files : 

https://h20566.www2.hpe.com/hpsc/swd/public/detail?idx=&action=driverDocument&itemLocale=&swItemId=MTX_80f3e2a16fa1431983208c0c85&mode=

then i become the error the the Files are not supported Firmware Files . 

Michael 

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎02-01-2016 04:47 AM

‎02-01-2016 04:47 AM

Re: How to Update Firmware of LTO5 Ultrium Drives in an MSL4048

This is for standalone drives only.

Search for MSL4048, get the bundle and use the file within.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.