How to upgrade firmware up tu 3.6

[multifunction_1]

Hi!

Using diagnostic software I have the error "Firmware rev '2.31' is out-of-date as of Wed Aug 24 19:00:00 2005; update to rev '3.60'."
How must manage the issue?

Thanks in advance

Emanuele

[MWills]

what device are you talking about?

[multifunction_1]

Sorry for the missing informations. I must upgrade a ESL9198 Tape Library.
I used "HP StoragWorks Library and tape tools" later unpacking the firmware exe file in the rigth directory as requested by the utility, but I've got the following error: "The 3MB memory module is incompatible with firmware
revisions 3.xx and higher. Likewise, the 5MB memory module
is incompatible with firmware revisions below 3.xx. Install
the correct memory module before performing a download with this firmware" Any suggestion?

Regards.

Emanuele

[divakar.k]

The firmware image of the ESL9198 - v3.6 requires a 5MB Memory module - this is in the robot controller board for the ESL libraries.

If the device is in the hung state you might have to install the previous version of the firmware 2.6 to get it functional

There is a way to tell which SIMM is install by a visual check, the 3MB SIMM only has chips on one side, the 5MB SIMM has chips on both sides

To install the latest firmware you need to have the 5MB Memory module in the Robotic controller