HPE Community
StoreEver Tape Storage
1822338 Members
5256 Online
109642 Solutions
New Discussion

HP MSL6030 server Windows Server 2008 R2 Standard 64

 
SOLVED
Go to solution
OlegK1070
Occasional Visitor

‎06-03-2011 03:11 AM

‎06-03-2011 03:11 AM

HP MSL6030 server Windows Server 2008 R2 Standard 64

Unable to connect HP MSL6030 library to a Windows Server 2008 R2 64bit.

 

0 Kudos
Reply
1 REPLY 1
TapeDrive Killer 1 2
Trusted Contributor

‎06-03-2011 08:31 AM

‎06-03-2011 08:31 AM

Solution

Re: HP MSL6030 server Windows Server 2008 R2 Standard 64

The NSR or E1200-160 or -320 is what you see but since the drives and library are SCSI you will need to map these devices within the NSR web interface, if you have already set up an IP address for the library then just open NSR GUI go to map and fill map then activate mapping and save. *Make sure your host uses the map you changed.

 

Pablo Alvarado Siles

Pablo Alv Siles
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.