msl6030 report something wrong!!

[Jaieun Chu]

I am connected msl6030 with web brouser
http://1.1.1.1 (e1200 ns router ip)
and I am found something wrong.

Msl6030 have two ultrium-2 drive.
But report info me that three drive founded
and one drive down message..

I attach report.
Would you give me some idea!

[Jaieun Chu]

I attach report file again!!

[Jaieun Chu]

attach have problem
so I convert it with text file!!!



DISCOVERY INFORMATION


SCSI Bus 0 Devices

Bus Target ID LUN ID Device Type State Map Count Device Description
0 0 0 CHGR UP 3 HP MSL6000 Series 0518
0 1 0 TAPE UP 3 HP Ultrium 2-SCSI F68W
0 2 0 TAPE DOWN 1
1 2 0 TAPE UP 2 HP Ultrium 2-SCSI F68W

[Charles Snowdon]

Your NSR (E-1200) has done a scsi bus device discovery when you have had all three devices connected to BUS 0,
(NSR->BUS0->MSL->Tape0->Tape1->Terminator)
(NSR->BUS1->Termintor)
you have then moved/added the scsi cables to the tape drive to BUS 1 on the NSR and is currently running ok
(NSR->BUS0->MSL->Tape0->Terminator)
(NSR->BUS1->Tape1->Terminator), the "ghosted" tape drive will be "DOWN" until you reboot the NSR

If your hosts connot see the second tape drive then your host maps may need adjusting as the current configuration
(NSR->BUS0->MSL->Tape0->Terminator)
(NSR->BUS1->Tape1->Terminator)
is the prefered solution

Charles Snowdon

[rich pattison]

The "ghost" tape drive (0 2 0 TAPE DOWN 1) - has a map count of 1 - which means it will not go away until you delete it from the map.

Review your mapping - delete the ghost unit, then reboot (don't forget to "activate map settings and save") - it would be a good idea to do a 'discovery' too, before rebooting.

[Jaieun Chu]

Thank you!! Every one!!
I have solved it by initializing library and
e1200 router ...