Web interface to MSL5052 Library?

[CA1192064]

I've reset the Level 1 and 2 passwords but the web interface still allows access using "11" for level 1 access and "22" for level 2 access. I think these were the original passwords setup on the library. The front panel only allows the new level 1 an 2 passwords for access. How do I change the passwords for HTTP access?

[CA859951]

Tom:

After you changed the passwords, did you power cycle the library? You need to if you didn't.

If you did, and they still are the default, you can use the MSLUtil 4.2 and change them:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?locale=en_US〈=English+%28US%29&pnameOID=316045&prodSeriesId=316040&prodTypeId=12169&basePartNum=COL3991&locBasepartNum=co-13092-1&os=Microsoft+Windows+2000+Pro&tech=Utility

Hope this helps! -john

[CA998057]

I may be wrong, but I believe (unless they finally fixed it!) that the web server interface passwords could only be changed via the serial port interface program, MSLUtil (v4.2 is current, I think).

Same for the FTP password setting, too.

What is the current release version of the F/W? (I am running a beta they called v99.36, but I think it was about v4.x for public release.)

[CA1192064]

Correct - changed passwords using serial port and util software - tested ok. Thanks!