How do I assign a StoreOnce 5100 to VMguest HPUX 11iv3 ?

[NestorArmando]

hi team,  I need to assign a StoreOnce 5100 to VMGuests (B.06.50). and I am not pretty sure if there exists a simple procedure...     

I know that there are a simple way to use Attached I/O (media, charger, burner)  and share them to some VMGuests but I did not find anything about StoreOnce/Catalyst   

¿can someone support me?.... its urgent con configure DataProtector within VMGuests.

Thanks.

[Amarjit_Y]

StoneOnce to HP-UX FC Connectivity:  Direct

StoreOnce Catalyst over Fibre Channel presents a device type of “Processor.” On HP-UX, these devices files are created in /dev/pt/ptX.

After zoning the devices or changing the Number of Devices per
Initiator Port, scan for device file changes. run the ioscan -fnC /dev/pt command as a root user.

By default, /dev/pt/ptX devices are accessible by root users only. If backups are run as a nonroot user, first grant the backup user permissions to access these device files using

chmod o +rwx /dev/pt/pt*.

For finer grained permissions, determine which /dev/pt/ptX device files relate to StoreOnce Catalyst over Fibre Channel using:
/usr/sbin/scsimgr -p get_attr all_lun -a device_file -a dev_type -a pid |
grep StoreOnce
Then use chmod o+rwx on the appropriate devices.