Event E00020101 EID_UTILIZATION_STATUS_EXCESSIVE

[M. N.]

I added 2 new P3400 units to a P4300 cluster.

The original cluster was configured with 3 LUNs filling up all the available space and worked fine.

I expanded the original LUNs to fill up the available space.

Now I get the warning I include.

All LUNs are primary with full provisioning.

The unused space on the cluster is about 30 GB

Should I reduce the size of the LUNs to less than 95%?

If so, why does the warning appear only after adding the new nodes?

As it is a warning, can I ignore it?

Regards

marius

Event                   :    E00020101 EID_UTILIZATION_STATUS_EXCESSIVE

Severity                :    Warning

Component               :    SAN/iQ

Object Type             :    Cluster

Object Name             :    <name>

Management Group        :    <name>

Cluster                 :    <name>

IP/Hostname             :    storage2

Date and Time           :    03/20/2013 13:09:01 GMT

User                    :    admin

Resolution              :    (...) 

Message                 :    The cluster '<name>' utilization is 99.73%.  This utilization value exceeds 95.00%.