HPE Community
StoreVirtual Storage
1854650 Members
8233 Online
104102 Solutions
New Discussion

P4300-G2 - Parity error after disk replacement

 
SOLVED
Go to solution
testmado662
Regular Advisor

‎08-03-2018 12:09 AM - last edited on ‎08-06-2018 02:58 AM by

‎08-03-2018 12:09 AM - last edited on ‎08-06-2018 02:58 AM by

P4300-G2 - Parity error after disk replacement

Hello,

After a disk predictabe failure on StroeVirtual P4300G2, we've replace disk and  RAID5 is ok now but we always  keep a parity error.

I saw other posts on same subject and I've found a disk FW version difference between new disk added and initial disks.

  • Does that disk FW version can impact parity error ?
  • We installed SPP before of disk replacement but I don't know what is SPP right version. We we installed last version june/2018 and no update needed. We used 2015 version and some upadate were applied. What's the last SSP version for P4300G2?

 

Thanks for your help

0 Kudos
Reply
3 REPLIES 3
testmado662
Regular Advisor

‎08-03-2018 12:13 AM - last edited on ‎08-06-2018 01:55 AM by

‎08-03-2018 12:13 AM - last edited on ‎08-06-2018 01:55 AM by

Re: P4300-G2 - Party error after disk replacement

A snaphot from CMC with FW difference

 

image.png

 

 

0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎08-03-2018 01:32 AM - edited ‎08-03-2018 01:36 AM

‎08-03-2018 01:32 AM - edited ‎08-03-2018 01:36 AM

Solution

Re: P4300-G2 - Parity error after disk replacement

AFAIR the P4300G2 is a DL185G6, the SPP you used (SPP2018.06) is nor Gen9 and Gen10 servers only.

 

The latest SPP for G6 servers was 2017.04 and has HPD4 for these drives.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
testmado662
Regular Advisor

‎08-03-2018 03:17 AM

‎08-03-2018 03:17 AM

Re: P4300-G2 - Parity error after disk replacement

Hello Torsten,

I tried 06-2018 SPP and other older but noting was updated. I'm going to dowload 04-2017 and try an update to fix the HDD  firmware version.

Thanks for your help

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.