HPE Community
Switches, Hubs, and Modems
1823944 Members
3189 Online
109667 Solutions
New Discussion юеВ

3500yl-24G: cannot access web management after software upgrade

 
Tuncay G
Occasional Contributor

тАО06-15-2011 07:06 AM

тАО06-15-2011 07:06 AM

3500yl-24G: cannot access web management after software upgrade

I have recently performed a software upgrade on 3500yl-24g (J8692A) to version K.15.04.0003. Before the software upgrade I could access the web manager using the switch's IP address.
Now I can only access it through telnet. Running configuration is attached. I have run the command "web-management" in config mode but it didn't work as well.
0 Kudos
3 REPLIES 3
cenk sasmaztin
Honored Contributor

тАО06-16-2011 08:05 AM

тАО06-16-2011 08:05 AM

Re: 3500yl-24G: cannot access web management after software upgrade

hi Tuncay I can't see any issue my switch
cenk

0 Kudos
cenk sasmaztin
Honored Contributor

тАО06-16-2011 08:23 AM

тАО06-16-2011 08:23 AM

Re: 3500yl-24G: cannot access web management after software upgrade

please make test

erase startup config your switch and make test
cenk

0 Kudos
Tuncay G
Occasional Contributor

тАО06-16-2011 11:44 PM

тАО06-16-2011 11:44 PM

Re: 3500yl-24G: cannot access web management after software upgrade

Thanks for the help, I solved this problem.
I was connecting to the switch using SSH port forwarding. Hence on my browser I was typing "localhost:[port]" to enter the web manager. After the software upgrade somehow this didn't work. Instead I tried "127.0.0.1:[port] and it worked.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.