3Com 2952 SFP - How to enable Web interface

[winnj13]

Hi Everyone,

Does anyone know how to enable the web interface on these switches ?

I can login via CLI from console port but would really like to be able to use the web interface. I must say that i've inherited these switches from a previous employee and there is little to no documentation as to how they were configured at install. They are currently part of the production environment.

I've used

_cmdline-mode on

To enable the system view and the extended menu's but the web option appears to be missing from the menu. Copy and paste of switch summary and full menu below, as you can see there is no Web option.

Current boot app is: flash:/S2900-CMW520-R1101P10.bin Next main boot app is: flash:/s2900-cmw520-r1101p10.bin

Next backup boot app is: NULL

3Com Corporation 3Com Baseline Switch 2952-SFP Plus Software Version 5.20 Release 1101P10 Copyright (c) 2004-2010 3Com Corp. and its licensors. All rights reserved. 3Com Baseline Switch 2952-SFP Plus uptime is 33 weeks, 6 days, 17 hours, 37 minutes

3Com Baseline Switch 2952-SFP Plus 128M    bytes DRAM 128M    bytes

Nand Flash Memory Config Register points to Nand Flash

Hardware Version is REV.B CPLD Version is 002

Bootrom Version is 119 [SubSlot 0] 48GE+4SFP

Hardware Version is REV.B

aaa                      Specify AAA configuration

acl                      Specify acl configuration information

archive                  Specify archive settings

arp                      Specify ARP configuration information

bootrom-update           bootrom update

clock                    Specify the system clock

cluster                  Specify cluster configuration information

command-privilege        Specify the command level

configuration            Specify configuration settings

copyright-info           Copyright information configuration

cut                      Cut connection

delete                   Delete function

dhcp                     DHCP configuration subcommands

dhcp-snooping            DHCP Snooping

display                  Display current system information

domain                   Add domain or modify domain attributes

dot1x                    Specify 802.1X configuration information

execute                  Batch Command

file                     Specify file system configuration information

ftp                      Specify FTP configuration information

gratuitous-arp-learning  Gratuitous Arp learning function

gratuitous-arp-sending   Sending gratuitous-arp packet when receiving different sub-network arp packet function habp                     Specify HABP configuration information

header                   Specify the login banner

hotkey                   Specify hotkey configuration information

igmp-snooping            IGMP snooping

info-center              Specify information center configuration information

interface                Specify the interface configuration view

ip                       Specify IP configurations for the system

job                      Schedule a system task

jumboframe               Jumboframe command

lacp                     Configure LACP Protocol

lldp                     Link Layer Discovery Protocol(802.1ab)

local-user               Specify local user configuration information

logfile                  Specify log file configuration

loopback-detection       Detect if loopback exists

mac-address              Configure MAC address

mib-style                MIB style

mirroring-group    Specify mirroring-group

multicast-vlan           Multicast VLAN

ndp                      Neighbor discovery protocol

ntdp                     Specify NTDP configuration information

ntp-service              Specify NTP(Network Time Protocol) configuration information

ping                     Ping function

pki                      Specify PKI module configuration information

port-group               Port group

public-key               Specify public-key module configuration information

qos                      Command of QoS(Quality of Service)

quit                     Exit from current command view

radius                   Specify RADIUS configuration information

return                   Exit to User View

rmon                     Specify RMON

save                     Save current configuration

sftp                     Specify SFTP service attribute

snmp-agent               Specify SNMP(Simple Network Management Protocol) configuration information

ssh                      Specify SSH (secure shell) configuration information

ssl                      Specify SSL (Secure Socket Layer) configuration information

stack                    Switch stack system

storm-constrain          Port storm-constrain

stp                      Spanning tree protocol

super                    Modify super password parameters

sysname                  Specify the host name

system-failure           System failure handling method

system-guard             System guard function

tcp                      Specify TCP(Transmission Control Protocol) configuration information

telnet                   Specify TELNET configuration information

temperature-limit        Set temperature limit

tftp                     Specify TFTP configuration information

tftp-server              TFTP Server

time-range               Specify time-range configuration information

tracert                  Trace route function

traffic                  Specify traffic configuration information

undo                     Cancel current setting

user-group               Specify user group configuration information

user-interface           Configure the user terminal interface

vlan                     Configure VLAN

voice                    Specify voice VLAN

Any suggestions greatly appreciated

Regards

Jonathan